Apache Labs ANAN-G2 - 3.6 Getting Started with the Raspberry Pi

ANAN-G2 Manual Page 17 of 35
If you get this screen,
select Execute in
Terminal
(if you want to remove this warning see section 3.6.4)
P2app running in a
terminal window looks
like this:
2. On G2 with NO display this does not need to be done and the p2app will launch
automatically on startup.
3. Start Thetis as normal on your chosen PC
4. Click Setup -> HW Select on the menu.
5. Select Radio Model to Anan-G2
6. Click OK
7. Start Thetis using its on/off button. It will discover and connect to your radio.
There is a manual for Thetis available here:
https://apache-labs.com/download_file.php?downloads_id=1020
3.6 Getting started with the Raspberry Pi
In normal use you will not need to interact much with the Raspberry Pi. However it is a full desktop
computer and you may want to make use of its features from time to time.
The easiest way to do this is with a keyboard, mouse and monitor. If you have a radio with front
panel display, it should already be displaying the Raspberry Pi desktop. If you don’t have a front
panel monitor, plug a PC monitor into one of the two rear panel HDMI connectors. It is also possible
to interact with the operating system using a command line interface through a network connection,
but this is only for those that like command lines!