ANAN-G2 Manual Page 31 of 35
Encoding=UTF-8
Terminal=true
Path=/home/pi/github/Saturn/sw_projects/P2_app
StartupNotify=false
Name[en_US]=P2app
X-KeepTerminal=true
Comment[en_US]=Saturn protocol 2 server
3. Use save as to save it to your desktop with filename p2app.desktop
4. Using your file browser, open your /home/pi/Desktop folder
5. Select file p2app.desktop (may shows as p2app with no extension)
6. Right click and select properties
7. Select the Permissions tab
a. Set View Content: to Anyone
b. Set Change content: to Only owner
c. Set Execute: to Anyone
8. Press OK
7.5.2 Icon for piHPSDR
1. Open a file editor. Your Raspberry pi will have several, and an editor called “geany” can be
loaded from the programming menu.
2. Enter (or paste) the text below into your editor window
[Desktop Entry]
Version=1.0
Type=Application
Terminal=false
Name[eb_GB]=piHPSDR
Exec=/home/pi/github/pihpsdr/pihpsdr
Icon=/home/pi/pihpsdr/hpsdr_icon.png
Name=piHPSDR
3. Use save as to save it to your desktop with filename piHPSDR.desktop
4. Using your file browser, open your /home/pi/Desktop folder
5. Select file piHPSDR.desktop (may shows as piHPSDR with no extension)
6. Right click and select properties
7. Select the Permissions tab
a. Set View Content: to Anyone
b. Set Change content: to Only owner
c. Set Execute: to Anyone
8. Press OK
7.6 Reflashing firmware
1. Run the flashwriter desktop application (see section 4.3.1)
2. Download a new firmware .BIT file
3. Click Open File, navigate to the .BIT file and click open
4. The BIT filename will now be displayed
5. Ensure the buttons are set to Primary
6. Click Program
7. The device will be programmed, and progress will be shown on the display.
To Next Page
Loading...