APART AUDIOSYSTEM8.8 - Out of Box Behavior

Instruction manual
AUDIOSYSTEM8.8
9
Out of box behavior
• 4 stereo inputs: AUX1 (1A & 1B), AUX2 (2A & 2B), AUX3
(3A & 3B) and AUX4 (4A & 4B).
• 4 stereo outputs: output 1 (1A & 1B), output 2 (2A &
2B), output 3 (3A & 3B) and output 4 (4A & 4B).
• Pushbuttons for source selection (AUX 1 - 4) and
+- for volume control (0 - 50).
• DIWAC 1A - 1B for output 1, 2A - 2B for output 2,
3A - 3B for output 3 and 4A - 4B for output 4
• Out of the box there are no FM presets configured but
they may be accessed and configured through the control
menu. The control menu in accessed by pressing +.
In the control menu it is possible to set EQ settings, set
default settings and do an FM scan.
Standard factory configuration:
Input Configuration:
Output Configuration:
Wall panel(DIWAC) configuration: