11
25. Zone 2 line/music input selector: turn this rotary input selector
to select input from line inputs A to D or set it to remote
control.
26. Music level knob: turn this volume knob to adjust the zone 2
music level.
27. Signal led: this green led indicates that a signal is present on
the left zone 2 output.
28. Signal led: this green led indicates that a signal is present on
the right zone 2 output.
29. Mic mix level knob: turn this volume knob to adjust the
microphone mix signal (mic/line 1-5 + link input) for zone 2.
30. Priority led: this led lights up when priority is activated by the
emergency input and/or by the mic 1 or mic 2 switch at the
rear and when priority is activated for zone 2 with the rear
dipswitch.
To Next Page
Loading...
