To Next PageTo Next Page
Need help?Do you have a question about the Apator Metra E-ITN 40 and is the answer not in the manual?
General| Brand | Apator Metra |
|---|---|
| Model | E-ITN 40 |
| Category | Cash Counter |
| Language | English |
Explains the allocator's LCD display, characters, and symbols, including power saving and activation.
Details the physical build and components of the E-ITN 40 allocator, including materials and assembly.
Lists data transmitted via NFC and radio, including serial numbers, dates, and temperatures.
Outlines the primary operational states of the allocator, such as working and error modes.
Explains how to navigate through the allocator's submenus using the button for information access.
Describes the primary operational state where the allocator measures, calculates, and transmits data.
Details the error state, its causes (e.g., A/D converter fault), and consequences for the allocator.
Instructions for reactivating the electronic seal after removal or refitting of the allocator.
Specifies conditions for transporting the E-ITN 40 allocators, including packaging and environment.
Outlines the recommended conditions for storing the E-ITN 40, covering temperature and humidity.
Provides information regarding the device's application and proper disposal procedures.
Instructions on how to handle and eliminate defects in the E-ITN 40, recommending manufacturer repair.
Details the warranty terms and conditions for the E-ITN 40, including voiding conditions.
Describes how allocators are disassembled, packed in boxes, and labeled for shipment.
General guidelines for installing the allocator onto the back plate, emphasizing sensor orientation.
Details the material (aluminium alloy) and function of the allocator's back plate for heat transfer.
Specifies optimal placement for E-ITN 40 on different radiator types, considering height and length.
Instructions for installing the allocator on segmented radiators, including clamp and bolt procedures.
Procedures for mounting the allocator on panel radiators using welded bolts and nuts.
Guidelines for installing on horizontal and vertical register types, detailing specific tube configurations.
