Need help?Do you have a question about the APC 2200VA 3U and is the answer not in the manual?
General| Rack Height | 3U |
|---|---|
| Input Connection | IEC 320 C20 |
| Nominal Output Voltage | 230V |
| Waveform Type | Sine wave |
| Nominal Input Voltage | 230V |
| Form Factor | Rackmount |
| Output Power Capacity | 1980 Watts / 2200 VA |
| Output Connections | IEC 320 C13, IEC 320 C19 |
| Battery Type | Sealed Lead Acid (SLA) |
| Capacity | 2200VA/1980W |
| Frequency | 50/60 Hz |
| Interface Ports | USB |
| Warranty | 2 years |
Guidelines for safe handling and APC's policy on life support applications.
Steps for unpacking, choosing a location, and preparing the UPS for installation.
Overview of installing the UPS into an equipment rack, including rail mounting.
Procedure for safely disconnecting and removing the heavy battery module.
Explanation of front panel indicators, buttons, and basic UPS operation.
Details on user-configurable items like self-test, UPS ID, and warning levels.
Adjusting high and low transfer points for voltage sensitivity.
Recommendations for storing the UPS and charging batteries during extended storage.
Detailed steps for replacing the hot-swappable battery module.
Steps to safely remove the UPS from a rack and detach the front bezel.
Solutions for UPS not turning on or not turning off.
Steps for troubleshooting and contacting APC customer service for assistance.
To Next Page