To Next PageTo Next Page
Need help?Do you have a question about the APC 450 and is the answer not in the manual?
General| Output Power Capacity | 450VA/270W |
|---|---|
| Nominal Output Voltage | 230V |
| Nominal Input Voltage | 230V |
| Waveform Type | Stepped approximation to a sinewave |
| Input Frequency | 50/60 Hz |
| Input Connections | IEC 320 C14 |
| Output Connections | IEC 320 C13 |
| Battery Type | Lead-acid battery |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0 - 95% relative humidity (non-condensing) |
Provides instructions for connecting and powering on the UPS unit.
Addresses frequent issues like UPS not turning on or beeping, offering solutions.
Instructions for safe handling of electrical components and avoiding shock hazards.
Warnings and procedures for safely managing hazardous UPS batteries.
Guidelines for safely lifting and moving the UPS equipment.
Details on selecting an installation area and methods like wall, desktop, or rack mounting.
Step-by-step instructions for safely replacing the UPS internal battery.
Instructions for initial power connection, equipment hookup, and battery charging.
Information on the port used for optional monitoring and control software.
Explanation of LEDs and audible alarms for UPS status like battery, overload, and battery replacement.
Details on shutdown, self-test, low battery, and cold start operating conditions.
Detailed technical parameters for voltage, load, battery life, dimensions, and approvals.
Steps for obtaining service, troubleshooting, and contacting customer support.
Contact details for APC support in Japan, including phone, web, and email.
Information regarding the product's warranty period, coverage, and exclusions.
