APC GALAXY 5000 User Manual

34001813EN/AE - Page 13
2. Installation
2.3 Removing the cardboard protecting the batteries
In the UPS
In the external battery cabinet
The cardboard protecting the batteries must always be removed once the equipment is installed in its final location.
1 - Remove the ties holding the cardboard (1).
2 - Remove the cardboard (2).
3 - Remove the struts (3).
The cardboard protecting the batteries must always be removed once the equipment is installed in its final location.
1 - Remove the battery support upright (1).
2 - Remove the ties holding the cardboard (2)
(1000 mm external battery cabinet).
3 - Remove the cardboard protecting the
batteries (3).
4 - Remove the ties holding the batteries (4).
IO
3
s
?
~
3
1
2
2
3
4
1

APC GALAXY 5000 Specifications

General

Brand	APC
Model	GALAXY 5000
Category	Power Supply
Language	English