APC Smart-UPS VT - Mechanical Bypass; Mechanical Bypass Lever; Turn into Mechanical Bypass; Switch into Normal Operation

990-2282A-001 Smart-UPS® VT 10-40 kVA 400V, 208V, 200V – Operation 1
Safety
For safety reasons, the trained user is only allowed to operate the display and replace the following
components:
• Network Management Card with temperature sensor (training necessary)
• Battery Module (training necessary)
Warning
All safety instructions in the Safety Sheet (990-2822) shall be read, understood,
and followed prior to handling/using the system. Failure to do so could result in
equipment damage, serious injury, or death.