2
Components included with the ROES-UV75-SS system:
Make sure you have all these parts before starting installation.
1 RO system head
with pre installed membrane
2 Color tubing 1/4”
3 Pre-filters in
3 Housings
UV Transformer
110V
1 Feed water adapter
3/8” - 1/2”
with needle valve kit
1 Tank ball valve
1 Storage tank
1 Drain Saddle
for waste water
Installation kit includes:
1 Faucet with tubing,
washers and nuts
(Faucet color may vary,
depends on the color selected)
2 Wrenches for opening filter
and Membrane housing
Recommended: Please keep both wrenches near
or on the RO unit for future maintenance.
To Next Page
Loading...
