Apec Water WFS-1000 User Manual

9
Riser
Tube
For Flexible Line
Faucet
Shank
Main Water
Supply
Shut-off
Valve
Riser
Tube
For Solid Line
Faucet
Shank
Needle
Valve
Needle
Valve
Main Wate
r
Supply
Shut-off
Valve
Sink
Sink
3. Recommend Connection For Flex Line Riser: See Fig. 6A. & Fig. 6E. Loosen nut and separate cold
water riser tube from shut off valve. Gently bend riser tube so that the Feed Water Adapter (Fig. 5) fits
onto the shut off valve. If your riser tube has no built-in washer, then fit the cone-shaped washer provided
onto the riser tube. Connect the riser tube, feed water adapter, and shut off valve together and tighten.
For Solid Copper Riser: See Fig. 6B. Follow the same procedure as for flex line. If the copper riser
cannot bend, this it’s best to replace it with a flex line riser. Fit the Feed Water Adapter to the shut off
valve the same way as described above.
Option Connection Point: See Fig. 6F. The feed water adapter can also be installed between the rise
tube and faucet shank. Loosen nut and separate cold water riser tube from faucet shank. Gently bend
riser tube so that the Feed Water Adapter fits onto the faucet shank. Connect the riser tube, feed water
adapter, and faucet shank together and tighten.
Fig. 6A Fig. 6B

Apec Water WFS-1000 Specifications

General

Brand	Apec Water
Model	WFS-1000
Category	Water Filtration Systems
Language	English