APEX DIGITAL
AD-1225
8
Connection to a TV
Refer to the manual of the connected TV.
T urn of f power and unplug both unit s before connecting.
If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture will be
distorted because all DVD players incorporate copyright protection circuitry by Macrovision
fi
.
Keep the DVD video player away from any tuner or radio to avoid any st atic or distorted sound interference from a broadcast.
Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfort able
listening level to avoid any speaker damage.
GOOD BETTER
Connect the DVD video player with an optional S-V ideo
cable if the TV has an S-V ideo input. Do not connect the
yellow video cable if using the S-V ideo cable.
!
Red
White
Yellow
Red
White
Yellow
Red
White
Black
Red
White
Black
TV Audio Input
TV Video Input
S-Video cord
(optional)
BEST
TO Pr VIDEO IN
TO Pb VIDEO IN
TO Y VIDEO IN
TO Pr
VIDEO
OUT
TO Pb
VIDEO
OUT
TO Y
VIDEO
OUT
Red
White
Red
White
When connecting YPbPr, do not connect S-
V ideo simult aneously.
COMPONENT VIDEO OUTPUT
Component output terminals when connected to
selected TVs and monitors will produce a higher
quality picture playback. Depending on the selected
TVs and monitors, the wording of the component input
terminals may vary. If there are any fluctuations with
the color played back, adjust the TV or monitor to
achieve the best audio and /or picture.
To Next Page
Loading...
