Apex Digital iX Fit - Humidifier Specifications; Noise Emissions Values

iX Fit / English 24
7.2 Humidifier with Chamber for iX series (Optional)
Item
Specification
Model No.:
9S-010800
Power Requirement:
DC, 24V, 2.5A
Dimensions:
11.5 x 14.2 x 14.7cm
Weight (without Water):
Approximately 590 g
Water Capacity:
To maximum fill line 300ml
Maximum Heater Plate
Temperature:
Approximate 70°C (158°F)
Note : please do not touch the heated plate during/after operating.
Pressure Drop:
0.2cmH
2
O @ 60LPM
Humidity Output:
≥ 12 mgH
2
O/L (Ambient temperature: 23°C ± 2°C & Relative
humidity: 60%±15%)
Operating Environment
Temperature: 5°C ~35°C (41°F ~95°F)
Humidity: 15%-95%RH, non-condensing
Altitude: Sea level to 2,438 m; air pressure range 1060 hPa to 752
hPa
Storage Environment
Temperature: -15°C ~50°C (5°F ~122°F)
Humidity: 10%RH to 90%RH, non-condensing
Transport Environment
Temperature: -15°C ~60°C (5°F ~140°F)
Humidity: 10%RH to 90%RH, non-condensing
Classification
Class II
Type BF, Applied Parts: Mask
Not suitable for use in the presence of a flammable anesthetic
mixture
IP22
Note: the manufacturer reserves the right to modify the specifications without notice.
7.3 Noise Emissions Values
The A-weighted sound pressure level is:
 Device: 28 dBA with uncertainty of 3 dBA).
 Device with Humidifier: 29.5 dBA with uncertainty of 3 dBA.
The A-weighted sound power level is:
 Device: 36.5 dBA with uncertainty of 3 dBA.
 Device with Humidifier: 38.0 dBA with uncertainty of 3 dBA.