api technologies corp. 7608AD Series - Windows Configuration & Control Utility; 6.1 SYSTEM REQUIREMENTS; 6.2 PROGRAM SETUP

Installation and Operation Manual
ECN: 003155
Date: 06/4/2013
17
AC-SmartStart-7608-Series_IOM Rev 04
Windows Conguration & Control Utility
6.0 Windows Configuration and Control Utility
The PDU management utility is designed to provide a graphical user interface to operate
and control several PDU’s.
6.1 SYSTEM REQUIREMENTS
• 32 bit Windows operating systems, including:
• Windows 95, Windows 98 and later or
• Windows NT 4.0 with service pack 3, Windows 2000 and later.
• Internet Explorer 4.0 or later.
• Video resolution of 800 x 600 in high color mode.
• 64 MB of RAM.
• One open COM port for RS232 communication.
• Windows Mouse or compatible pointing device.
Note: Windows 95, Windows 98, Windows NT and Windows 2000 are trademarks of
Microsoft Corporation.
6.2 PROGRAM SETUP
Follow the instructions included with the media package. The installation program will
install the program and create system shortcuts in the system start menu.To remove the
program, follow the instructions from your particular operating system. These directions
normally point the user to the Control Panel Add/Remove programs wizard.
NOTE: Some installations may require a reboot in order to update runtime files or con-
trols before final installation.
Load the CD into the computer which will control the PDU using a serial interface.
Lauch the program by double clicking on the SETUP.EXE icon. The following window
will be displayed.