Apogee Element 24 Quick Start Guide

Apogee Element Series Quick Start Guide | 11
Getting Started
System Requirements
• Computer: Thunderbolt™-equipped Mac
• Mac OS 10.10 or greater
• Memory: 4 GB RAM minimum, 8 GB recommended
• Connection: Any available Thunderbolt port*
• Software: Any Core Audio compatible application
*Thunderbolt cable not included
Install Element Software
1. Download the latest Element Software Package
from www.apogeedigital.com/support
2. Open the downloaded .dmg le and double-click
the Element Installer.pkg that’s inside.
3. Follow the prompts provided by the software
installer package. You will be required to restart
your computer.
Element Control
After installation is complete, you will nd the Element
Control Application in your Mac’s Applications folder. All
of Element’s settings and parameters are controlled from
this application.

Apogee Element 24 Specifications

General

Type	Thunderbolt Audio Interface
Computer Connectivity	Thunderbolt
Form Factor	Desktop
Channels	24
Bit Depth	24-bit
A/D Resolution	24-bit
Analog Inputs	2 x XLR-1/4" combo (mic/line)
Digital Inputs	1 x Optical Toslink (ADAT/SMUX)
Digital Outputs	1 x Optical Toslink (ADAT/SMUX)
Headphones	1 x 1/4"
Sample Rate	192 kHz
Software Compatibility	macOS
Analog Outputs	2 x 1/4" TRS (Main Out)