Need help?Do you have a question about the Apogee Quartet and is the answer not in the manual?
General| Sample rate | 192 kHz |
|---|---|
| Audio quality | 24 bit |
| Frequency range | 44.1 - 96 Hz |
| Microphone maximum input | 20 |
| Headphone outputs | 1 |
| Product color | Black, Silver |
| Minimum RAM | 2 MB |
| Minimum processor | 1.5 |
| Compatible operating systems | iOS, Mac |
| LED indicators | Yes |
Lists the essential hardware and operating system specifications for Mac.
Provides a step-by-step guide for installing the Quartet software.
Details setting analog input level, type, and phantom power via Maestro software.
Details how to set input gain using touchpads and the controller knob.
Explains controlling speaker volume via touchpads and the controller knob.
Explains controlling headphone volume via touchpads and the controller knob.
Explains how to manually assign software outputs to hardware outputs for custom setups.
Assigns touchpads to mute speaker, headphone, or all outputs.
Assigns touchpads to lower output volume by 15 dB for brief muting.
Assigns touchpads to combine stereo channels to mono for phase checking.
Assigns touchpads to switch between multiple speaker sets.
Assigns touchpads to clear peak and over indicators on meters.
Explains OS X System Preferences and Audio MIDI Setup for Quartet.
Explains all settings and controls within the Maestro Input tab.
Explains all settings and controls within the Maestro Output tab.
Details peripheral prefix, touchpad, and encoder push assignments.
Explains how to configure signal routing for analog outputs.
Describes controls for input/output levels, panning, solo, mute, and returns.
Provides solutions for distortion, choppy, or buzzy audio issues.
Guides on how to fix issues where the Quartet is not recognized by Mac or software.
To Next Page
