2 Speaker Sets
When the “2 Speaker Sets” option is selected, Software Outputs 1-2 are routed to Hardware Outputs
1-2 and 3-4. (as shown in the Routing tab below)
In the Maestro Output Tab, the A and B buttons to the right of the output control knob become active.
The C button remains inactive.
Clicking button A sends the main output signal
to the speakers connected to Quartet’s ANALOG
OUT 1-2 and mutes ANALOG OUT 3-4.
Clicking button B sends the main output signal
to the speakers connected to Quartet’s ANALOG
OUT 3-4 and mutes ANALOG OUT 1-2.
Operation - Apogee Quartet User’s Guide
Version 1, September 2012 22
To Next Page
Loading...
