Apogee Rosetta 200 - Power Switch Jumper Settings

APOGEE ELECTRONICS
10
ROSETTA 200 – User’s Guide
Additional Configurations - continued
JUMPER P3
(as seen from front) DESCRIPTION
When AC power is applied to the input, the unit does not
power up immediately; to power on the unit,the POWER
button must be pressed.
When AC power is applied to the input, Rosetta 200 powers
on immediately; nevertheless, the POWER switch is
functional.
Figure 6
Power Switch Setting
JUMPER P3
Figure 7
A/D Calibration
-20 -19 -18 -17 -16 -15 -14 -13 -12 -11 -10
for example: -16.4 dBfs
for example: -12 dBfs
dBfs (CAL mode only)
Figure 7