Name: Apollo 16
Brand: Apollo
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Apollo 16 Hardware Manual Front Panel 12

Monitor Mute

Pushing the Monitor knob toggles the mute state of the signals at monitor outputs on the rear panel. When the

monitor outputs are muted, the Monitor Level Indicator (8) is red. When the monitor outputs are not muted, the

Monitor Level Indicator is green.

(8) Monitor Level Indicator

The signal level at the rear panel monitor outputs is displayed with the illuminated indicator ring surrounding

the Monitor Level knob (7). The ring is green when the monitor outputs are active, and red when the monitor

outputs are muted. This level indicator is after the Monitor Level control (post fader).

Note: This feature indicates relative levels only and is not calibrated to any speciﬁc dB values.

(9) Power Switch

This switch applies power to Apollo 16. When the unit is powered on, the Universal Audio logo is illuminated.

The external power supply must be properly connected for this switch to function.

As with any sound system, to avoid audio spikes in your speakers, the following steps are recommended:

• Apply power to the speakers last, after all other devices (including Apollo 16) are powered on.

• Turn off the speakers ﬁrst, before all other devices (including Apollo 16) are powered off.

Questions and Answers:

Need help?

Do you have a question about the Apollo 16 and is the answer not in the manual?

Apollo 16 Specifications

General