Solarpaint
AL1206 Installation Manual
14.9.2023
Rev. [B1]
Page 18 of 28
m) Apollo-approved adhesive for polycarbonate corrugated sheet ("Suntuf"):
n) Apollo-approved adhesive for PVC waterproofing membranes
o) Apollo-approved adhesive for Bitumen waterproofing membranes
p) Adhesive quantities
• For steel deck, PVC, and Polycarbonate: A quantity of 220ml is required for adherence
of each module.
• For Bitumen: A quantity of 400ml is required for adherence of each module.
q) Removal
Please refer to Annex B for module removal instructions.
3. Note for substrate and fire testing
• IEC 61215, IEC 61730, and UL 61730 testing of AL1206 modules was only performed on a
non-combustible corrugated steel deck substrate at up to 5 degrees tilt angle.
• Resistance to external fire sources was only evaluated per EN 13501-5:2016.
To Next Page
Loading...