EasyManua.ls Logo

Apollo Panda - Introduction; Disclaimer

Default Icon
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solarpaint
AL1206 Installation Manual
14.9.2023
Rev. [B1]
Page 3 of 28
Introduction
Apollo’s proprietary technology: flexible, lightweight, durable, and efficient solar modules designed to
transform any surface under the sun into an electricity source.
Apollo's PV modules are specially designed for structures and buildings with limited load-bearing
capacity. The Apollo ultralight and fully flexible technology enable the owner of those facilities to join
the solar revolution without compromising on the solar system's efficiency, productivity, and durability.
The following manual focuses on the Apollo AL1206 (Panda) applications for:
structures with corrugated steel deck
structures with PVC waterproofing membrane cover
structures with Bitumen waterproofing membrane cover
any structure that complies with the mechanical and electrical instructions in this document
Apollo AL1206 (Panda) may be installed on, or attached to, a wide variety of Non-combustible substrates.
Depending on the installation type, the modules adhere to various substrates using recommended
double-sided tape \ single-component adhesives.
Note that the installation kit provided by Apollo contains the PV module only. Required installation
materials mentioned in this manual (adhesives, screws, etc. ) shall be provided by the installer.
Disclaimer
The product referenced in this manual was designed and manufactured by Solarpaint Ltd. a subsidiary
of Apollo Power Ltd. (“Apollo”). In this manual, both companies will be referred to as Apollo. The
information provided herein is provided "As Is". Apollo makes no representations or warranties
concerning the content hereof and assumes no responsibility for any inaccuracies, errors, or omissions
that may appear in this information. The installation, operation, use, and maintenance of photovoltaic
(PV) products are beyond Apollo’s control, Apollo does not accept any responsibility and expressly
disclaims liability for loss, damage, or expense of any kind arising out of or in any way connected with
such installation, operation, use or maintenance or compliance or non-compliance with the instructions
outlined in this manual. No responsibility is assumed by Apollo for any infringement of patents or any
other rights of third parties, which may result from the use of the PV product and/or this manual.
No license is granted by implication or otherwise under any patent or patent rights. The information in
this manual is based on Apollo's knowledge and experience and is believed to be reliable, however, such
information including (without limitations) product specification and suggestions do not constitute a
warranty, expresses or implied. Apollo reserves the right to change the installation manual, the PV
product, the electrical specifications, or the product information sheets without prior notice.
In the event of any inconsistency among different language versions of this document, the English
version shall prevail. Please refer to our documents published on our website at: www.Apollo-
power.com. these documents are updated regularly.