98
⑷Oil changes
■Oil changes a s f o l l o w i n g :
●Remove the oil dip rod 5,bolt 3,
washer 2.
●Drain out the engine oil while the
engine is still warm.
●Clean oil dip rod 5,drain bolt 3 and
washer 2 with solvent.
●Install washer 2 and drain bolt 3.
●Fill engine oil, the oil level should
be on the oil dip rod 5 upper limit.
●Start the engine and alow it to run
for several minutes at idling
speed, then turn off the engine.
●Make sure no oil leakage.
1、Left Crankcase
2、Washer
3、Bolt
4、Cover
5、Oil dip rod
6、Oil filter
To Next Page
Loading...