EasyManua.ls Logo

Applestone APU06E - Page 66

Default Icon
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
Jump-starting
Jump-starting the vehicle should be
avoided. The battery should be
removed and charged instead. however,
if the vehicle must be jump-started,
proceed as follows.
1Turn the key to “OFF”.
2Open the hood. Remove the battery
compartment cover.
3Using a charged 12V battery, connect
the positive lead of the jumper cable to
the positive terminal of the battery in the
vehicle and the
4Connect the negative lead of the
jumper cable to the negative terminal of
the negative lead to an unpainted metal
surface of the vehicle.
1. Jumper cable positive lead
2. Jumper cable negative lead
! WARNING
Do nor connect the negative lead of the
jumper cable to the negative terminal of
the battery in the vehicle.
Be especially careful not to:
touch the positive lead of the jumper
cable to the negative lead.
reverse the polarity of the jumper cables
when connecting to the batteries-battery
explosion and/or serious damage to the
electrical system may occur.

Related product manuals