EasyManua.ls Logo

Applestone APU06E - Page 67

Default Icon
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
5Start the engine.
6After the engine starts, disconnect the
negative lead of the jumper cable
from the vehicle and charged battery,
and then disconnect the positive lead
of the jumper cable from the charged
battery and the battery in the vehicle.
7Install the battery compartment cover.
8Close the hood.
Warming up
To get maximum engine life, always
warm up the engine before starting off.
Never accelerate hard with a cold
engine! To see whether or not the
engine is warm, check if it responds to
the throttle normally with the starter
(choke) turned off.
Shifting: Neutral to Reverse
1. Stop the vehicle. Keep your foot off
the accelerator pedal.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice
versa by moving the drive select lever
along the shift guide.
4. Check behind for people or obstacles,
then release the brake pedal.
5. Press the accelerator pedal gradually
and continue to watch to the rear
while backing.

Related product manuals