Need help?Do you have a question about the Application Systems ADX-32 and is the answer not in the manual?
Details the front panel connectors, including Cat5 connections for ADAT signal transmission.
Explains rear panel connections like ADAT ports, Cat5 ports, and power input.
Explains the system's capability to transmit ADAT channels over Cat.5 network cables and its flexibility.
Highlights benefits like cost reduction, lossless transmission, scalability, and compatibility with various data formats.
Provides a critical warning about using Cat.5 cable only between ADAT extenders and avoiding connection to ethernet equipment.
Details Cat5 Connection 1 for ADAT connections 1-4 over Cat5 cabling, noting jacks A and B are paralleled.
Describes Cat5 Connection 2 for ADAT connections 5-8 (ADX-64 only), with identical operation to connections 1-4.
Details the power input specifications, voltage, wattage, and connector type, including fuse protection.
Explains ADAT Lightpipe inputs and outputs 1-4 and how transmission direction is set via DIP switches.
Describes ADAT Lightpipe inputs and outputs 5-8 for the ADX-64 version, noting identical operation to connections 1-4.
Details how DIP switches 1-4 set the transmission direction (input or output) for ADAT connections, including loopback function.
Explains the use of DIP switches 5-8 for enabling termination resistors to prevent signal degradation on Cat5 cables.
Explains the necessity of a common clock (wordclock) in digital audio systems for synchronized signal processing.
Describes how wordclock is transmitted within the ADAT data stream itself, eliminating the need for separate sync cables.
Details using a separate coaxial cable for wordclock distribution, common in larger installations for better sync control.
Illustrates a 16-channel input and 16-channel output configuration using ADX-32 for digital multicore audio transmission.
Presents a 24-channel input and 8-channel output setup with ADX-32, utilizing ADAT for wordclock synchronization.
Shows a 48-channel input and 16-channel output configuration with ADX-64, using a separate coax cable for wordclock sync.
Details the device type (ADX-32/ADX-64) and its ADAT/Cat5 connector specifications.
Covers transmission media, max distance (100m), max devices (32), and supported data formats.
Specifies converter latency (<50ns) and the pinout for Cat5 cable connections.
Outlines power supply requirements (8-24V DC, 5W) and mechanical dimensions (1U rack).
Details the two-year warranty period, repair/exchange policy, and exclusions for damages.
Lists company contact details for support, including website, email, and phone number.
General| Brand | Application Systems |
|---|---|
| Model | ADX-32 |
| Category | Extender |
| Language | English |
To Next Page