Apricorn DriveWire - Page 38

38
www.apricorn.com
Verication errors
When the option Verifying is activated, EZ Gig executes a verication run
after the copying process. A verication error is counted if the data of two
sectors on source and target do not correspond. Furthermore, read errors,
which occur during the verication run in one or both of the areas to be
compared, are also counted as verication errors. Therefore, the number
of verication errors gives you absolute information on how exactly source
and target correspond to each other after the copying process. In case of
an error-free copying process, EZ Gig should not report any verication
errors and signalize a 100% conformity of source and target.