To Next PageTo Next PageWhat to do if my Aprilaire Thermostat lost internet connection?
If your Aprilaire Thermostat displays 'Internet Connection Lost', it means the thermostat wasn't properly configured when connecting to the router. Make sure there is no IP conflict and repeat the Wi-Fi setup.
What does radio error mean on Aprilaire Thermostat?
If your Aprilaire Thermostat shows 'Radio Error', it indicates an internal error with the thermostat's Wi-Fi radio. It is suggested to contact an HVAC professional for repair.
What does sensor error mean on Aprilaire 8830 Thermostat?
The 'SENSOR ERROR' message on your Aprilaire Thermostat indicates an open temperature sensor circuit.
What does remote sensor error mean on Aprilaire 8830 Thermostat?
The message 'REMOTE SENSOR ERROR' on your Aprilaire Thermostat signifies an open remote temperature sensor circuit.
What does EEPROM error mean on Aprilaire 8830?
The 'EEPROM ERROR' on your Aprilaire Thermostat means there is an error in the permanent memory.
Why does my Aprilaire 8830 say lost system connection?
The 'LOST SYSTEM CONNECTION' message on your Aprilaire Thermostat indicates that the thermostat has lost connection to the equipment interface module.
What does support modules lost mean on Aprilaire 8830 Thermostat?
The 'SUPPORT MODULES LOST' message on your Aprilaire Thermostat means that all support modules with controlling temperature sensors are in error.
What to do if WiFi is turned off on Aprilaire Thermostat?
If your Aprilaire Thermostat displays 'WiFi Turned Off', it means the Wi-Fi radio is turned off. Please, refer to the Accessing Wi-Fi Settings Menu in the Owner’s Manual for information about turning the Wi-Fi radio on.
General| Programmability | 7-Day Programmable |
|---|---|
| Stages | Up to 2 Heat / 2 Cool |
| Voltage | 24V |
| Wi-Fi Connectivity | Yes |
| Display | Color Touchscreen |
| Humidity Control | Yes |
| Programmable | Yes |
| Smart Home Compatibility | Amazon Alexa, Google Assistant |
| Product Type | Thermostat |
| Compatibility | Compatible with most HVAC systems |
| Power Source | 24VAC |
Confirm thermostat's Wi-Fi connection status by checking radio bars on the display.
Scan for and connect to the thermostat's Wi-Fi network using a computer or mobile device.
Access the thermostat's web interface via IP address to configure Wi-Fi network settings.
Confirm successful Wi-Fi connection by observing signal strength bars on the thermostat display.
Guidance on ideal placement for the thermostat to ensure accurate temperature readings.
Step-by-step instructions for physically mounting the thermostat onto the wall.
Guidance on selecting an appropriate location for the equipment control module.
Instructions for securely mounting the equipment control module, including screw usage.
Details on thermostat wire specifications and proper connection to the equipment control module.
Instructions for wiring optional support modules for remote sensing capabilities.
Instructions for installing the included outdoor temperature sensor for accurate weather data.
Information on using an optional wireless sensor for outdoor temperature and humidity monitoring.
Recommendations for optimal placement of the remote temperature sensor for accurate readings.
List of locations to avoid when mounting the remote temperature sensor to prevent interference.
Details on wire gauge, installation steps, and important notes for connecting the equipment control module.
Explains the function of each terminal (C, R, W, Y, etc.) and their wiring connections.
Instructions for locating, mounting, and wiring the optional return air temperature sensor.
Instructions for locating, mounting, and wiring the optional leaving air temperature sensor.
Wiring diagram for conventional systems using a single transformer with jumper configuration.
Wiring diagram for conventional systems using two transformers with jumper removed.
Wiring diagram for heat pump systems using a single transformer and jumper wire.
Wiring diagram for heat pump systems using two transformers with jumper removed.
Wiring diagram for IAQ components using separate transformers.
Wiring diagram for IAQ components using a single transformer.
Information about the thermostat's power source and the reset button for factory defaults.
How to use the SW1 switch to configure the thermostat for heat pump or heat/cool systems.
Guide on entering the installer setup menu and selecting system configurations.
Instructions on navigating and modifying system settings within the installer menu.
Detailed table of system settings, their descriptions, and default values for thermostat configuration.
Further details on thermostat system settings, covering advanced features and options.
Overview of IAQ settings, noting the importance of the outdoor sensor for enhanced functionality.
Configuration options for the air cleaner, including installation and filter reminders.
Settings for humidifier installation, modes, operation, and reminders.
Configuration options for dehumidifier control, setpoints, and reminders.
Settings for ventilation installation, setup type, and environmental limits.
Steps to access the system test menu for diagnostic purposes.
List of various system tests available, such as heating, cooling, and fan tests.
Tables detailing the expected output status for various equipment tests.
Explanation of the thermostat's home screen elements and available controls.
Guide to navigating the main menu and its various settings and options.
Explanation of the status lights on the equipment control module.
Guide to diagnosing and resolving issues with the thermostat's Wi-Fi connection.
List of error codes, their messages, and descriptions for system faults.
Addresses common problems like heat/cool overlap or system response issues.
