Aprilaire 8446 - User Manual

7 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

READ AND SAVE THESE INSTRUCTIONS

Thermostat

OWNER’S MANUAL

8400 Series

Thermostats

Product Info &

Digital Manual

Table of Contents

Other manuals for Aprilaire 8446

User Manual2 pages

Safety & Installation Instructions15 pages

Features2 pages

Questions and Answers

A
ariel65Jul 25, 2025
What to do if the Aprilaire 8446 Thermostat heating system does not respond?
- U
  uchandlerJul 25, 2025
  If your Aprilaire thermostat's heating system isn't responding ('HEATING' appears on the screen), try these steps: First, check the circuit breaker and reset it if needed. Next, ensure the power switch at your heating and cooling system is turned on. Also, make sure the furnace door is securely closed. If your thermostat uses batteries, ensure fresh AA alkaline batteries are correctly installed. Finally, verify that your heating temperature is set between 45° to 90°F (7° to 32°C).
M
Mark BrownAug 2, 2025
Why is my Aprilaire 8446 Thermostat cooling system not responding?
- P
  Pamela HumphreyAug 2, 2025
  If your Aprilaire thermostat's cooling system isn't responding ('COOLING' appears on the screen), consider the following: Check for 24 VAC at the equipment on the secondary side of the transformer between power and common. If voltage is absent, inspect the cooling equipment to identify the problem. Verify there's 24 VAC between the cooling terminal (Y) and the transformer common. If present, the thermostat is likely functional, so check the cooling system. Inspect for loose or broken wires between the thermostat and the cooling equipment. Ensure SW1 (Equipment Type) is correctly set to match your installed heating/cooling equipment. Lastly, confirm that heating and cooling wires are not shorted together.
M
Mariah LittleAug 8, 2025
What to do if Aprilaire 8446 heating equipment is running in cool mode?
- S
  Sara HernandezAug 9, 2025
  If your heating equipment is running in cool mode on your Aprilaire Thermostat, you can try the following: Check System Setting #02 (Fan Control) to ensure the fan control is correctly set to match your system type. Also, change the System Mode to Heat and set the temperature higher than the current room temperature.
S
sdavisAug 17, 2025
Why is my Aprilaire 8446 Thermostat heat pump blowing cool air in heat mode?
- J
  Joseph StoneAug 17, 2025
  If your heat pump is blowing cool air in heat mode, or warm air in cool mode, with your Aprilaire Thermostat, check System Setting #12 (Reversing Valve). You can also try changing the System Mode to Cool, and set the temperature level below the current room.

Aprilaire 8446 Specifications

General

Brand	Aprilaire
Model	8446
Category	Thermostat
Language	English

Related product manuals

Preview: Aprilaire 8444

Preview: Aprilaire 8463

Preview: Aprilaire 8476

Preview: Aprilaire 8476W

Aprilaire 8476W

Preview: Aprilaire 8400 series

Aprilaire 8400 series

Preview: Aprilaire 8600

Preview: Aprilaire 8800

Preview: Aprilaire 8570

Preview: Aprilaire 8365