APsystems DS3-M - Apsystems Microinverter DS3 Series Introduction

APsystems Microinverter DS3 series Installation manual
7
3. APsystems Microinverter DS3 series Introduction
APsystems 3
rd
generation of dual microinverters are reaching unprecedented power outputs of 600VA, 730VA,
799VA, 880VA, or 960VA to adapt to today’s larger power module. With 2 independent MPPT, encrypted ZigBee
signals, the DS3-S, DS3-L, DS3-M, DS3, and DS3-H benefit from an entirely new architecture and are fully
backwards compatible with the QS1 and YC600 microinverters.
The innovative and compact design make the product lighter while maximizing power production. The
components are encapsulated with silicone to reduce stress on the electronics, facilitate thermal dissipation,
enhance waterproof properties and ensure maximum reliability of the system via rigorous testing methods
including accelerated life testing. A 24/7 energy access through apps or web based portal facilitate remote
diagnosis and maintenance.
The new DS3 series is interactive with power grids through a feature referred to as RPC (Reactive Power Control)
to better manage photovoltaic power spikes in the grid. With a performance and an efficiency of 97.3%, a unique
integration with 20% less components, APsystems DS3-S, DS3-L, DS3-M, DS3, and DS3-H are a game changer to
residential and commercial PV.
Key Product Feature:
 One microinverter connects to two modules
 Max output power reaching 600VA or 730VA or 799VA or 880VA or 960VA
 Two input channels with independent MPPT
 Reactive Power Control
 Maximum reliability, IP67
 Encrypted ZigBee Communication
 Safety protection relay integrated