APsystems ECU-C - 5.2 Add UID; 5.3 Historical ID

ECU-C Installation/User Manual
16
5.EMA Manager
5.2 Add UID
 Enter microinverters UID (serial numbers) into the ECU-C
Click “Workspace”, select “ID Management”, input the
microinverters UID (serial number: 12 digits starting with a 4, a 5, a 7
or a 8) manually or scan the UID with your smartphone or tablet
scanner. Once the microinverters UID have been entered, please
press “Sync”.
5.3 Historical ID
 If the ECU accidentally emptied the
inverter list, you can use the same mobile
phone to quickly restore the inverter id
list.