APsystems ECU-C - 5.4 Delete UID; 5.5 Grid Profile

ECU-C Installation/User Manual
17
5.EMA Manager
5.4 Delete UID

In case of wrong entry or typo, select the microinverter UIDs, click
“Delete” then click “Sync”. The selected UID(s) will be removed
from the ECU-C.
Note: when deleting, please press also “Sync”. Otherwise the
microinverter will not be removed from the ECU-C.
Once the microinverters UID have been successfully entered into the
ECU-C, you need to select grid profile and define the adequate time
zone of your ECU.
5.5 Grid Profile
 From the workspace, select “Grid profile”.
 First select country and then the city.
If you select the wrong grid profile, the microinverters may not start
or may not produce as per optimal performance.