ECU-C Installation/User Manual
5.EMA Manager
5.EMA Manager
5.9.2 LAN
Make sure the LAN cable is connected to the network port on the
back of the ECU-C.
Connect the LAN cable to a spare port on the broadband router.
ECU’s wired network setting has 2 options:
automatically obtain an IP address: the router will give an IP address
to the ECU-C automatically (preferred method) .
use a fixed IP address. In that case, you need to enter enter IP
address, subnet mask, default gateway, Preferred DNS server and
Alternate DNS server.
To Next Page
Loading...
