EasyManua.ls Logo

APsystems YC600 - Symbols and Qualified Personnel

APsystems YC600
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
YC600 Installation/User Manual
4
1.Important Safety Instructions
1.3 Symbols replace words on the equipment, on a display, or in
manuals
Trademark.
Caution, risk of electric shock.
Caution, hot surface.
Symbol for the marking of electrical and electronics devices according to Directive
2002/96/EC. Indicates that the device, accessories and the packaging must not be
disposed as unsorted municipal waste and must be collected separately at the end of
the usage. Please follow Local Ordinances or Regulations for disposal or contact an
authorized representative of the manufacturer for information concerning the
decommissioning of equipment.
Refer to the operating instructions.
Qualified
personnel
Person adequately advised or supervised by an electrically skilled person to enable
him or her to perceive risks and to avoid hazards which electricity can create. For
the purpose of the safety information of this manual, a "qualified person" is
someone who is familiar with requirements for safety, refrigeration system and
EMC and is authorized to energize, ground, and tag equipment, systems, and
circuits in accordance with established safety procedures. The inverter and endues
system may only be commissioned and operated by qualified personnel.

Other manuals for APsystems YC600

Related product manuals