APT LCD 510S User Manual

APT(Tianjin) Develop Co., Ltd.
8.8 Speed limit (SP): Press Mode will change speed limit, range 10km/h~41km/h. Default
value is 25km/h.
9
．
Error Code define
510S can show warning message, icon shows on the screen, and show error code at
the bottom of the screen, error code is from 01 E~0nE, and the definition see the table
below.
Error Code
Error description
Handle
0x21
Current protection
Check controller.
0x22
Throttle error
Check throttle and connection.
0x23 three-phase power error Check three-phase power line connection
0x24 Hall error Check the hall connection
0x25 Brake error Check the brake connection.
0x26~99
Reserved
Please contact the controller’s manufacturer for error
definitions
0x30
Communication Error
Check the cable connection
10
．
Assembly instructions
Please pay attention to the screw’s torque value, damaged caused by excessive torque
is not within the scope of the warranty.
1001, Building 5 HuaDing, No.1 HuaKe 3 Road,
Binhai hi-tech Industrial Development Zone, Tianjin, China
7 TEL: 86 22 2634 5859
FAX: 86 22 8371 9955
Email: apt@aptdevelop.com

APT LCD 510S Specifications

General

Brand	APT
Model	LCD 510S
Category	Monitor
Language	English