Contents [ hide
1 IMPORTANT SAFETY
INSTRUCTIONS
2 SAVE THESE INSTRUCTIONS
2.1 RF Warning Statement:
2.2 Product Details
3 Installing
4 Operations
5 File Downloads
6 References
7 Related Manuals
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed, including the following:
1. Read and understand all instructions before using.
2. Close supervision is necessary when any fixture is used
by or near children. Do not leave the fixture unattended while in use.
3. Care must be taken as burns can occur from touching hot surfaces.
4. Do not operate the fixture if a cord is damaged, or if the fixture has been dropped or damaged, until it has been
examined by qualified service personnel.
5. Position any power cables such that they will not be tripped over, pulled, or put into contact with hot surfaces.
6. If an extension cord is necessary, a cord with an amperage rating at least equal to that of the fixture should be used.
Cords rated for less amperage than the fixture may overheat.
7. Always unplug the lighting fixture from the electrical outlet before cleaning and servicing, or when not in use. Never
yank the cord to remove the plug from the outlet.
8. Let the lighting fixture cool completely before storing.
9. To reduce the risk of electric shock, do not immerse this fixture in water or any other liquids.
10. To reduce the risk of fire or electric shock, do not disassemble this fixture. Contact cs@aputure.com or take it to
qualified service personnel when service or repair work is required. Incorrect reassembly may cause electric shock
when the lighting fixture is in use.
11. The use of an accessory attachment not recommended by the manufacturer may increase the risk of fire, electric
shock, or injury to any persons operating the fixture.
12. Power this fixture by connecting it to a grounded outlet.
13. Please remove the protective cover before powering on the light. Please remove the protection cover before using the
reflector
14. Please do not block the ventilation and do not look at the light directly when it is powered on.
CAUTION:
DO NOT TOUCH LED LIght surface
15. Please do not place the LED lighting fixture near any liquids or other flammable objects.
16. Only use a dry microfiber cloth to clean the product.
17. Please have the product checked by an authorized service personnel agent if your product has a problem.
18. The malfunctions caused by unauthorized disassembly are not covered under the warranty.
19. We recommend only using the original Aputure cable accessories. Please note that our warranty for this product does
not apply to any repairs required due to any malfunctions of unauthorized Aputure accessories, although you may
request such repairs for a fee.
20. This product is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in full compliance with the
operation standards. Please note that this warranty does not apply to repairs arising from malfunctions, although you
may request such repairs on a chargeable basis.
21. The instructions and information in this manual are based on thorough, controlled company testing procedures.
Further notice will not be given if the design or specifications change.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
