Configure Automations
13
DescriptionDefinitionAutomatic name
StatusSomeone is detected Presence
Status, it usually takes 6-30s of continuous
detecting from presence to absence.
Noone detectedAbsence
Status
Status
Scope of duration: 1s~23h59min59s
Default: 10min
presence for some time
It is detected that
someone entered the space
Enter
Scope of duration: 1s~23h59min59s
Default: 10min
Absence for some time
Transient, only valid for the first person.
Le-in and right-in will be distinguished
under the le-right monitoring mode.
Global effective only, le-in and right-in
events of the zone won't be reported.
It is detected that someone is leaving.Leave
Transient, only effective for the last
person. Le-out and right-out will be
distinguished under the le-right
monitoring mode. Global effective only,
le-out and right-out events of the zone
won't be reported.
Transient, both the global and the zone
can have approaching events;
If the threshold is approached by any
one of the targets, an approaching event
will be reported.
It is detected that someone
enters from the le side.
It is detected that someone
leaves from the le side.
It is detected that someone
enters from the right side.
It is detected that someone
leaves from the right side.
Enter from the le
Leave on the le
Enter from the right
Leave on the right
Transient
Transient
Transient
Transient
There are 3 levels of sensing distance for
approaching: Far, Medium,
Near Default: Medium
Approaching
Transient, both the global and the zone
can have departure events;
If anyone is away from the threshold, a
departure event will be reported.
There are 3 levels of sensing distance
for approaching: Far, Medium, Near
Default: Medium
going away
To Next Page
Loading...
