Need help?Do you have a question about the Aqara FP2 and is the answer not in the manual?
General| Product Type | Presence Sensor |
|---|---|
| Category | Accessories |
| Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| Detection Distance | Up to 5 meters |
| Detection Angle | 120° |
| Field of View | 120° |
| Product Name | Aqara FP2 |
| Power Supply | USB Type-C |
| Input Power | 5V 1A |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 0 ~ 95% RH, no condensation |
| Compatibility | Apple HomeKit, Amazon Alexa, Google Assistant, Aqara Home |
Safety precautions and limitations for fall detection and product handling.
Details the device's LED status and corresponding operational states.
Guidance on choosing the appropriate installation method based on detection needs.
Steps for physically installing the device and powering it up.
Instructions for downloading and acquiring the necessary Aqara Home application.
Troubleshooting common issues encountered during HomeKit device pairing.
Selecting detection modes like presence, zone, and fall detection.
Disables indicator lights during specified periods to reduce light pollution.
Details presence, zone, and fall detection modes and direction reversal.
Adjusting sensitivity for response speed and accuracy in presence detection.
Configuring thresholds for proximity sensing based on distance.
Tuning sensitivity for fall detection to balance accuracy and false alarms.
Clears all targets in the entire space to resolve false alarms.
Synchronizes set zone names with Apple Home for unified naming.
To Next Page
