D5 NEXT
The black wires (GND) are to be connected to the side of the missing pin, see pic-
ture with colored pin assignment.
Pin assignment: Pin 1: GND (black, optional)
Pin 2: GND (black)
Pin 3: D+ (green)
Pin 4: D- (white)
Pin 5: +5 V(red)
5.3.
5.3.5.3.
5.3. Connector “Fan” for fan or flow sensor
Connector “Fan” for fan or flow sensorConnector “Fan” for fan or flow sensor
Connector “Fan” for fan or flow sensor
Depending on configuration, this connector can either be used as a PWM regulat-
ed fan output with speed signal processing or to connect a flow sensor. Simultane-
ous use of both functions is not possible!
Pin assignment: Pin 1: GND
Pin 2: 12 V / max. 25 W
Pin 3: Speed signal
Pin 4: PWM signal
Flow sensor and special interconnecting cable are optional accessories and not in-
cluded in delivery.
Compatible flow sensors:
● Flow sensor with 5.6 mm nozzle (53061)
● Flow sensor “high flow” (53068)
● Connection cable for flow sensor (53027, 53100)
5.4.
5.4.5.4.
5.4. Connector “Bus” for aquabus or RGBpx
Connector “Bus” for aquabus or RGBpxConnector “Bus” for aquabus or RGBpx
Connector “Bus” for aquabus or RGBpx
Depending on configuration, this connector can either be used for communication
with other Aqua Computer devices or to connect RGBpx products (up to 90 ad-
dressable LEDs). Simultaneous use of both functions is not possible!
Compatible aquabus devices:
● aquaero 6 XT (53146, 53206, 53250, 53251, 53262, 53263)
● aquaero 6 PRO (53145, 53253)
● aquaero 6 LT (53234)
● aquaero 5 XT (53089, 53125, 53249)
● aquaero 5 PRO (53090, 53252)
● aquaero 5 LT (53095)
If the RGBpx product to be connected has more than one RGBpx connector, the
connector marked with the word “IN” must be used! Additional RGBpx products
may be connected to the “OUT” connector.
Compatible RGBpx products:
● RGBpx LED-Strip (53268, 53269, 53270)
● RGBpx lighting set (53271, 53272)
● RGBpx Splitty4 (53267)
● RGBpx LED ring for ULTITUBE (34115)
© 2019-2020 Aqua Computer GmbH & Co. KG - 7 -
Gelliehäuser Str. 1, 37130 Gleichen