Aqua PH-02713 - 4.4 Setting Water Temperature; 4.5 Parameter Settings

AIR TO WATER POOL HEAT PUMP VERTICLE PH SERIES
22/ 52 VERSION 19 , RELEASE 29th June 2020
22
/
52
4.4 How to set your desired water temperature
4.5 How to change parameter setting
After unlocking, With a finger touch "setting" key and more than about 3 seconds when you hear the
"beep" sound remove your finger, enter the parameter setting mode Parameter set up, with a finger touch
"setting" key, then move to the next parameter setting until all parameter settings after exit setting mode.