1. PREFACE
To our customers:
Please read this manual carefully before you install the product, otherwise it may lead to damage to the
heat pump or may injure operators as well as cause financial loss.
1.1 Preface
• In order to provide our customers with quality, reliability and versatility, this product has been
manufactured to strict production standards. This manual includes all the necessary information
about installation, debugging, discharging and maintenance. Please read this manual carefully
before implementation or maintenance of the unit. The manufacturer of this product will not be
held responsible if someone is injured or the unit is damaged, as a result of improper installation,
debugging, or unnecessary maintenance. It is vital that the instructions within this manual are
followed at all times. The unit must be installed by professional technicians.
• The unit can only be repaired by professional technicians, installers or an authorised dealer.
• Maintenance and operation must be carried out according to the recommended time and
frequency, as stated in this manual.
• Use genuine standard spare parts only. Failure to comply with these recommendations will
invalidate the warranty.
• A swimming pool heat pump unit heats the swimming pool water and keeps the temperature
constant.
Our heat pump has the following characteristics:
i. Durability
The heat exchanger is made of a PVC & Copper Nickle tube which can withstand prolonged
exposure to swimming pool water
ii. Installation on flexibility
The unit can be installed outdoors
iii. Quiet operation
The unit comprises of an efficient rotary / scroll compressor and a low-noise fan motor, which
guarantees its quiet operation.
1.2 Safety precautions
To Next Page
Loading...