Aquarian Thermo installation instuctions page 13
Replace the existing conventional on/off
control graphic ring with the new one
purchased separately.
4
Replace the control knob ensuring it is in the same position as prior to being
removed.
5
The shower controls will now be reversed so
the on/off control is now on the right and the
temperature control on the left as viewed
from the front.
!
If being fitted with a adjustable height head, remove and rotate the outlet
connection 180º to ensure it is positioned at the bottom of the valve.
6
Refit the adapted cartridge assembly to the backplate and refit the shrouds
as previously instructed.
7
To Next Page
Loading...
