EasyManuals Logo

AquaSure AS-HS64D User Manual

AquaSure AS-HS64D
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2
www.AQUASUREUSA.com
Tel: 1-800-661-0680
I. Be Familiar with the System Before Installation
IMPORTANT! Please read the entire manual and become familiar with instructions and parts
needed before proceeding with the installation.
Inspect the System
Please take the system and all the components out of the box. Inspect the system and all the
connection ttings carefully, make sure nothing is damaged during shipping. If any part is cracked
or broken, please do not proceed with the installation and contact Aquasure or your distributor
for an exchange or diagnosis.
INSPECTION & PREPARATION
System Components Breakdown (See Dia. A)
Aquatrol Valve Electronic Meter
4’ of 3/8” Brine Line
Brine Tank
Bypass Valve
Drain Line Fitting
15’ of 1/2” Drain Line
Top Distributor
Resin Media
Resin Tank
Riser Tube & Bottom Distributor
Control Valve
Upper Distributor Basket
Power Transformer
Brine Connector Pack
Small Parts Kit
Thank you for choosing Aquasure. Before you starting installing your Aquasure Harmony Series
Whole House Water Softener. Please take a few minute to become familiar with the basics.
WELCOME
Required Tool List for System Installation
Channel Locks
Screwdriver
Teon Tape
Razor Knife
Two Adjustable Wrenches
Plastic inlet and outlet ttings are included
with the softener. To maintain full valve
ow, 1” pipe to and from the softener
ttings are recommended.
Use copper , bass, or PEX pipe and ttings.
Some codes may also allow PVC plastic
pipe.
Additional tools may be required if
modication to home plumbing is required.
Required Components not Included with the System
Extra Course Grade or Crystal water softener salt is needed to ll the brine tank
Understanding How The Water Softener Works
The principle behind water softening is simple chemistry. A water softener contains resin beads
which hold electrically charged ions. When hard water passes through the softener, calcium and
magnesium ions are attracted to the charged resin beads. The result is removal of calcium and
magnesium ions which produces soft water.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AquaSure AS-HS64D and is the answer not in the manual?

AquaSure AS-HS64D Specifications

General IconGeneral
BrandAquaSure
ModelAS-HS64D
CategoryWater Dispenser
LanguageEnglish

Related product manuals