The FI7000 interface provides both power to
and communication with the FL/PL 7000 series
probes. A low-level loop back fiber optic con-
nection is used to sense unexpected disconnect
of laser driven fibers to ensure user-safe opera-
tion. As an additional safety measure, shuttered
connectors are used on all fiber optic connec-
tions to and from the probe.
The FI7000 can be used with the FM7004A Field
Monitor (using the provided 0.5 meter fiber optic
cable) or a PC by direct communication using
the USB, GPIB, or RS-232 interfaces.
Features
Specifications
FI7000
Probe Interface
AR RF/Microwave
Instrumentation
160 School House Rd
Souderton, PA 18964
215-723-8181
For an applications engi-
neer call:800.933.8181
www.arworld.us
To order AR Products, call 215.723.8181. For an applications engineer call:800.933.8181. Direct to Service call: 215.723.0275 or
email: service@arworld.us For Faxing Orders:866.859.0582 (Orders Only Please) info@arworld.us
Approved for public release by AR RF/Microwave Instrumentation 020816
Interfaces:
IEEE-488 (GPIB)
USB 2.0, Test and Measurement class
RS-232 (19200 Baud)
Fiber Optic Serial (19200 Baud) reserved for con-
nection to FM7004A Field Monitor
Laser Fiber Optic Serial reserved for connection to
one FL/PL 7000 series probe
Fiber Optic Connectors:
(2) E2000 compact duplex female for probe com-
munication and safety fiber loop
(2) FSMA for fiber connection to FM7004A
Laser: 500 mW, 830 nm
Laser shutdown time:
<1 msec after fiber disconnect
< 250 msec after loss of communication
Power Requirements:
Input Voltage 90-260 VAC, 50-60 Hz
Input Current 0.2 - 0.6 A
Input type IEC inlet with filter
Enclosure: Desktop case, 2U high; 1U blank pan-
el installed.
Dimensions (WxHxD):
without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x
1.75 x 10.0 in)
with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0
x 12.0 in)
Weight:
without enclosure 2.5 kg (6.25 lb)
with enclosure 7.25 kg (16 lb)
Operating Temperature Range: 10°C to 40°C
(50°F to 104°F) @ 5% to 95% RH non-condensing
Model Description
FI7000 Housed in a 2U instrument case
FI7000M1 Rack mount (Instrument case removed)
Specifications
To Next Page
Loading...
