araknis AN-310-SW-R-24 User Manual

© 2020 Araknis Networks
®
10
Araknis Networks AN-210/310-SW-F/R Manual
Product Manual
Table of Contents
Factory Reset
Reboot or default the switch configuration settings.
Rear Facing Models
RESET
1 3 5 7
2 4 6 8
Link/Act1 Gbps
9 SFP 10 SFP
Link/Act
1 Gbps
Front Facing Models
AN-310-SW-F-8-POE
Compact Switch
48 Port Models
1 Gbps/PoE
1. Reboot – Press and hold the RESET button on the back of the switch for 5 seconds, then release. The
switch will power cycle and the front status lights will flash.
2. Factory Reset – Press and hold the RESET button for 10-15 seconds until the status LEDs flash once. The
switch will power cycle and be reset to factory default settings.

araknis AN-310-SW-R-24 Specifications

General

Brand	araknis
Model	AN-310-SW-R-24
Category	Switch
Language	English