EasyManuals Logo

ARC R12 User Manual

ARC R12
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BAG 01
0201
PAGE-01 PAGE-21
PAGE-32&34
PAGE-36
PAGE-26BULKHEAD ALIGNMENT PROCESS
PAGE-03 PAGE-06
PAGE-11&19
PAGE-13
ADDITIONAL INSTRUCTION ADDITIONAL INSTRUCTION
R121025
R122101
R121025 R12 Center Pulley 20T
R122101 R12 Center Pulley Hub-Alu
R102020
R123001
R805101
R121030
R103050
(0.3mm)
R103050
(0.3mm)
R121030
R105104
R105205
R106001
R103051
R121030
The aluminum eccentric hub provide more precise
and minimize gap when adjust belt tension.
R122017 R12 Eccentric Hub-Alu (4)
Option Parts (Not Included)
CORRECT ITEM NUMBER
NOTICE
OPTION PARTS R129004 R12 ATS SYSTEM (Not Included)
CORRECT ITEM NUMBER
NOTICE
Step 1 Release bulknead screw
Step 2 Assemble all upperdeck screw and tight
Step 3 Tight the bulknead screw evenly
Step 3 Tight the bulknead screw evenly
Recommend length for initial setup
NOTICE
Option Parts (Not Included)
(Long)
(Short) (Short)
(Long)
Length 15.2mm X 2 Set
Front Link
Rear Link
Length 14.2mm X 2 Set
17mm
R113028
R113029
R103028 4x11x0.25mm Shims (8)
R103029 4x11x0.5mm Shims (8)
Option Parts (Not Included)
The track width can be increased by adding
R113028 (0.25mm) and R113029 (0.5mm).
2.5mm Hex hole inside
for tight the axle
To make sure the bulkhead become ture aligned please do
below process when assemble the bulkhead.
Left Side Right Side
Left SideRight Side
FRONT
REAR
R103050
(0.3mm)
R103050
(0.3mm)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ARC R12 and is the answer not in the manual?

ARC R12 Specifications

General IconGeneral
Scale1/12
Drivetrain4WD
Power SourceElectric
Run Time20 minutes
SuspensionIndependent
Remote ControlYes
Remote Control Frequency2.4GHz
Remote Control Range100 meters
Battery TypeLiPo
MaterialPlastic, Metal
Charging Time180 minutes