Need help?Do you have a question about the Arcam DiVA AVR250 and is the answer not in the manual?
General| Amplifier Type | Class AB |
|---|---|
| Power Output | 100 W per channel |
| Channels | 7 |
| Total Harmonic Distortion | < 0.05% |
| Inputs Component | 3 |
| Outputs Component | 1 |
| Outputs Composite | Yes |
| Outputs Subwoofer | 1 |
| Weight | 11.5 kg |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Signal-To-Noise Ratio | > 100 dB |
| Tuner Bands | AM/FM |
| Digital Sound Processor (DSP) | Yes |
| HDMI Switching | Yes |
| Outputs 7.1 Pre-outs | Yes |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Response Bandwidth | 20 - 20000 Hz |
| Surround System Class | 7.1 |
| Surround Sound Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| Amplifier Output Details | 100W per channel (8 ohms, 20Hz - 20kHz, <0.02% THD) |
| THD | 0.02 % |
Setup for FM signal generator and distortion analyzer measurement.
Setup for RDS generator and FM signal generator measurement.
Setup for AM loop antenna and signal generator measurement.
Block diagram for Audio Board IC TC9273N-004.
Block diagram for Audio Board IC TC9273N.
Block diagram for Audio Board ICs NJM5532M.
Block diagram for Com-Video Board ICs LT1675CGN.
Block diagram for Com-Video Board IC LT1675CS8-1.
Block diagram for DSP Board IC 74HC245.
Block diagram for DSP Board ICs 74HCU04.
To Next Page
