Need help?Do you have a question about the Arcam DiVA AVR200 and is the answer not in the manual?
General| Type | AV Receiver |
|---|---|
| Audio Decoding | Dolby Digital, DTS |
| Input Sensitivity | 200 mV |
| Signal to Noise Ratio | > 100 dB |
| Amplifier Type | Class AB |
| DAC | 24-bit/192kHz |
| Surround Sound Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| Tuner | FM/AM |
| Remote Control | Yes |
| Power Output | 100W per channel |
| Frequency Response | 20Hz - 20kHz |
| Inputs | 2 x Optical, 2 x Coaxial |
| Input Impedance | 47k ohms |
| Audio Inputs | 6 x RCA, 2 x Optical, 2 x Coaxial |
| Audio Outputs | 7 x Speaker terminals, 1 x Subwoofer, 1 x Optical, 1 x Coaxial |
| Video Inputs | 4 x Composite |
| Video Outputs | 2 x Composite, 1 x S-Video |
Technical details for power amplifier and preamplifier stages.
Performance metrics for surround sound and audio formats.
Specifications for AM and FM tuner reception capabilities.
Unit dimensions, net weight, and shipping weight.
Step-by-step instructions for removing the unit's top cover.
Diagram indicating adjustment points for the tuner section.
Points for setting the amplifier's idle current.
Detailed steps for aligning the amplifier idle current.
Guidelines for setting up FM and RDS signal measurements.
Guidelines for setting up AM signal measurements.
PCB layout for Audio and Component Video boards.
PCB layout for the AC-3 board.
PCB layouts for Amplifier (AMP1, AMP2) and Speaker boards.
PCB layouts for Key, Main, Multi Channel, and Tuner boards.
PCB layouts for PSU, Secondary, S-Video, GSW, Power, Phone, LED, Volume, and Tone boards.
Detailed schematic of the AC-3 and DTS processing circuits.
Schematics for the AMP1 and AMP2 power amplifier boards.
Schematics for Key, Multi Channel, S-Video, Main, and Tuner circuits.
Schematics for Audio, Composite Video, REM, and PSU circuits.
Block diagrams of ICs on the AC3 board.
Block diagrams for ICs on Audio, Key, and Main boards.
Block diagrams for ICs on Multi Channel and Tuner boards.
Parts list for AC3 board, including capacitors, diodes, and basic components.
Component lists for Amplifier, Speaker, and Tuner sections.
Component lists for PSU, Tone, Switch, ROM, and interface boards.
To Next Page
