Need help?Do you have a question about the Arcam PA240 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Input Sensitivity | 1V |
| Input Impedance | 10 kΩ |
| Power Consumption (maximum) | 800W |
| Power Output (4 ohms) | 380W per channel |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | 110dB |
| Damping Factor | 100 |
| Total Harmonic Distortion | <0.005% (20Hz - 20kHz, 100W, 8Ω) |
| Dimensions | 433mm x 425mm x 171mm |
To Next Page
