ARCAM SA45 OM EN V2
7
WIRELESS CONNECTIONS
Wi-Fi Connection:
| To make a Wi-Fi connection, download the ARCAM Radia app to your
smartphone or tablet.
| Links to the app are on the front page of this manual.
Setup - ARCAM Radia App
| Power on the ARCAM SA45 and open the app to discover it after the
SA45 is Ready.
| Select it and follow the prompts to connect it to your Wi-Fi router.
| When connected, the SA45 will appear with a “POWER” icon.
| Select the SA45 to access Podcasts, Internet Radio and presets, USB
connected media, Local network storage (UPnP), and settings.
Bluetooth Input
| To pair your Bluetooth source device, turn on
the SA45 and select the Bluetooth input.
| Now open the Bluetooth settings on your
source device and scan for SA45 ######
from the list. Each product has a unique ID.
| Select the SA45 to pair and begin playback
from your device.
The Amplifier can recall 5 device pairings. If 5 are in memory already, the oldest will be replaced.
Because portable devices have a volume slider with large volume steps, there is a maximum volume setting in
the amplifier to prevent excessive volume output being selected accidentally. The default is 40.
Bluetooth Output
To use Bluetooth headphones, select Bluetooth
Output from the Audio menu.
Note: Bluetooth headphones cannot be used
in conjunction with the Bluetooth input on the
SA45.
Select whether you want to use Auracast, paired
headphones or pair a new set.
| To pair a new set of headphones set your headphones into pairing mode for the SA45 to discover them. The
SA45 will pair with the first headphones it discovers that are in pairing mode.
Bluetooth
HDMI
Phono MM Phono M
Analogue 1
Analogue "
Bluetooth Operation
To Next Page
Loading...
