EasyManua.ls Logo

Arcam Solo movie 2.1 - Technical Specifications (Solo movie 5.1); Power Output and Audio Input Specs

Arcam Solo movie 2.1
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-36
technical
specifications
Continuous power output, per channel
2 channels driven, 1kHz, 0.2% THD (8Ω/4Ω) 75W/120W
5 channels driven, 1kHz, 0.2% THD (8Ω/4Ω) 60W/75W
Residual noise & hum (A-wtd) 300µV
Stereo line inputs
Maximum input 2.1V rms
Input impedance 10kΩ
Signal/noise ratio (A-wtd ref 100W) 90dB
Frequency response 20Hz—20kHz ± 0.1dB
Headphone output
Maximum output level into 32Ω 2.5Vrms
Output impedance
Video
HDMI In/Out supported formats 4K2K (24/30Hz), 1080p (50/60Hz), 1080i (50/60Hz),
720p (50/60Hz), 480p/576p, 480i/576i
Digital interfaces
USB USB 2.0 High Speed (480 Mbit/s)
Network 10 BASE-T / 100 BASE-TX
S/PDIF Optical 44.1kHz, 48kHz, 88.2kHz, 96kHz
S/PDIF Coaxial 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz
Bluetooth SBC, AAC, aptX, aptX-LL
General
Mains voltage 110–120V or 220–240V, 50 –60Hz
Power consumption (maximum) 1kW (Thermal dissipation approx. 3400 BTU/hour)
Power consumption (idle, typical) 60W (Thermal dissipation approx. 200 BTU/hour)
Power consumption (standby) <0.5W
Dimensions (W x D x H) 420 x 414 x 90mm
Weight (net) 12.0kg
Weight (packed) 15.5kg
Supplied accessories Mains lead
Remote control
2 x AAA batteries
User manual
DAB/FM aerial
Bluetooth antenna
Wi-Fi antenna
E&OE
NOTE: All specification values are typical unless otherwise stated
Solo movie 5.1
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications
are subject to change without notice.

Other manuals for Arcam Solo movie 2.1

Related product manuals